5 Ways To Get Through To Your GARAGE DOOR REPAIR

Garage door repair may often be done by the homeowner themselves. There are at least 5 simple things to check, before calling a professional. Some repairs are really easy. For example, a stiff or a squeaky door will merely require a good cleaning and lubrication. Other repairs, such as repairing a torsion spring, are really dangerous and require help from a professional.

Before proceeding to the repair, ensure that you unplug your garage door opener, so you do not get a power shock while you are repairing your garage door. You will most likely be standing on a ladder, which is a very bad spot to get an electric shock, because you could also fall off the ladder. Also, remember to garage door companies North Las Vegas wear safety glasses when working with power tools.

Here is a list of things to check before calling for a professional for the garage door repair:

1. Check the Metal Tracks for Damages

This easy garage door repair tip may often solve the problem extremely fast. The metal tracks often may have dents or bumps. If you discover such damages, strike the damaged the main track with a wood block and a hammer to straighten the track.

2. Check the Alignment of the Tracks

If the tracks aren’t aligned well, they might be causing the door never to work. It’s not always necessary to unscrew the tracks; you can just try to loosen the bolts or screws and to tap the tracks slightly into position. Use a level to check on the alignment of the tracks. Aligned tracks enables you to be done together with your garage door repair in no time.

3. Clean and Dry the Tracks

Though it may sound obvious, but hardened dirt and old lubricant may be the cause of the garage door sticking. In this case, your garage door repair may contain merely cleaning the tracks and then drying them. You need to use regular cleaners to clean the tracks.

4. Lubricate the Tracks and the Rollers

Merely lubricating both, the tracks and the rollers, can repair the problem and conclude your garage door repair in no time. For lubrication, you may work with a lubricant spray or perhaps a silicon spray. It is probably easier to lubricate the tracks after cleaning them. Actually, any movable part will benefit from lubrication.

5. Tightening the Loose Bolts and Screws

Bolts and screws have a tendency to become loose with time. Make an effort to check each of the screws and bolts involved in the opening/closing mechanism of your door. Sometimes, merely tightening them may solve the whole problem. If you cannot tighten the screws, as the holes themselves have grown to be loose, then you can work with a “wood filler” or bits of normal wood to fill the holes.

What Not to Do?

If you have tried every one of the above solutions, and none of them have worked, the problem could be the door spring. However, it is advised never to perform your garage door repair if the issue appears to be the spring, especially if it is a torsion spring. Unfortunately, there have been numerous cases, where folks have gotten injured as well as killed by the garage door springs. The most common injuries is really a hit in the head, resulting in serious trauma to the brain.